Compool Cp3800 User's Guide download pdf (Page 13)

Compool/EasyTouch Pool and Spa Control System Upgrade Installation and User’s Guide

Controls and buttons (Continued)

Valves (V) - (Pool/Spa/Fill (Spillway)/Drain) button: When in normal operating mode, the

Valves (V) button is in “Pool” mode. In this mode the valves are automatically rotated so that

only the pool water is circulated through the system and the filter pump is activated. Pressing this

button once enables “Spa” mode and activates the filter pump to circulate only spa water

through the system. “Fill/Spillway” and “Drain” mode can only be used while in “Service” mode

(See Mode button for details). “Fill/Spillway” and “Drain” mode are used when cleaning the spa.

Pressing the Valves (V) button again returns the system to “Pool” mode. Note that the filter

pump will switch off while the pool/spa valves are rotating into position. The current operating

mode is shown in the LCD display. Note: The Valves button (Pool, Spa, Fill (Spillway),

Drain) button has no function in “Pool only” or “Spa only” systems. For an EasyTouch

single body system, “Pool” and “Spa” modes are Lo- Temp (Pool) and Hi-Temp (Spa)

temperature controls. For more information, see “Hi-Temp/Lo-Temp Controls for Single

Body Systems,” page 37.

Aux 1 - 7 buttons/LEDs: Auxiliary output circuit buttons operate the pool and spa system valves,

lights and other equipment. These auxiliary circuits are assigned in the “Circuit Function” menu, see

page 39 for details. There are seven auxiliary circuits (AUX 1- 7) on Compool/EasyTouch outdoor

control panel. The Solar button can also be used for an “extra” auxiliary circuit if the Solar circuit is

not being for solar equipment. Labels can be affixed next to each auxiliary button to identify the

circuit function. Labels can be affixed over each auxiliary button to identify the circuit function.

When an auxiliary circuit is activated or the button is pressed, the LED is on. Pressing an auxiliary

circuit button will activate the corresponding circuit in either “Auto” or “Service” mode. When a

circuit relay is switched on manually, it remains on until either you switch it off manually, or the next

time the relay is scheduled to be switched off. For example, if the filter pump is scheduled to

automatically run from 9:00 AM to 5:00 PM daily then the filter pump is switched on manually at

9:00 PM, it will run continuously until the next day at 6:00 PM then switch off. The schedule will

then continue from then on.

Heater (Flame) button/LED: This button is only used in “Service” mode for manual heat on and off

control. The Heater LED will be on if “Heater” is enabled in the “Heat” menu setting (see page 25).

Switching the heater on automatically controls the output between a “forced off” state and a normal

automatic thermostatic control operating state. The heater will continue heating the water until the

heater’s current highest set point temperature triggers the heater sensor (approximately 104° F).

Note that the Heater button does not activate the pump. Do not activate the heater without running

the pump. The heater will not run if water flow is not detected.

Solar (Sun) button/LED and (Aux Extra): In solar mode this button is only used in “Service” mode

for manual solar heat on and off control. The Solar LED will be on if “Solar” is enabled in the

“Heat” menu setting. Solar must also be enabled in the “Solar” menu. Use the Solar button to

manually switch the heater control output between a “forced off” state and a normal automatic

thermostatic control operating state. When this button is pressed the solar relay is switched on to

activate a booster pump if installed and activates valves to rotate to divert water through solar

heating panels. If solar equipment is not being used, this button can also be used to switch the AUX

EXTRA circuit on and off.

Reset button: Press this button to reinitialize the Compool/EasyTouch outdoor control panel.

➇

➈

➉

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 87 88

Comments to this Manuals

No comments

Compool Cp3800 User's Guide Page 13

Comments to this Manuals

Related products and manuals for Above ground pool accessories Compool Cp3800