Compool Cp3800 User's Guide download pdf (Page 43)

Compool/EasyTouch Pool and Spa Control System Upgrade Installation and User’s Guide

Settings Menu: IntelliChlor

While the EasyTouch system is in normal operating mode (“Pool,” “Spa” mode or “Spa Fill (Spillway),” it will

control the IntelliChlor chlorine output level. The amount of chlorine introduced into the pool is determined by

the amount of salt in the water, water temperature, and the amount of time the pool pump is running in “Pool”

mode. Note: While in “Freeze Protection” mode, IntelliChlor will not operate or produce chlorine during the

time that the filter pump is operating. For more information, refer to the IntelliChlor Electronic Chlorine

Generator User’s Guide (P/N 520589).

IntelliChlor

To setup the IntelliChlor :

Right button: Enable/Disable IntelliChlor. (To select SuperChlor, run hours, press the

Up/Down button - 2/2).

Up/Down buttons: Select Yes or No to enable or disable IntelliChlor.

Right button: POOL Mode “50%” setting.

Up/Down buttons: Set the chlorination output level for the pool water from 0 to

100%. EasyTouch will determine the chlorinator output level when the system is

operating in “Spa” or “Pool” mode. The amount of chlorine introduced into the pool/

sap is determined by the amount of salt in the water, water temperature, and the

amount of time the pool/spa operates in these modes mode.

Right button: SPA Mode “0%” setting.

Up/Down buttons: Set the chlorination output level for the spa water from 0 to 20%.

To prevent over chlorination of the spa, the EasyTouch system will automatically drop

the chlorine output levels to 1/20th of the current pool output when the spa is switched

on. For example, if the pool output level is set to 60%, when the spa is switched on,

the chlorination level is reduced to 3%.

Right button: Select the next set of settings (2/2).

Up/Down buttons: Select 2/2.

Right button: Move the Super Chlorination settings.

Up/Down buttons: Set Super Chlorination On or Off. See note below about Super

Chlorination.

Right button: Select “Run Hours” setting.

Up/Down buttons: Set the number of hours to run Super Chlorination. 24 hours is

the default setting. Run hours can be set from 0 to 72 hours.

Press the Menu button to save the settings and to return to the Settings menu

options. Press the button again to return to the main menu options or press again to

return to the main screen.

Note: For IntelliChlor status messages, see “Diagnostics: Chlorinator” page 53.

About Super Chlorination: The Super Chlorination feature is used to introduce large amounts of chlorine

into the pool water if there has been heavy rain fall, many bathers in the pool, cloudy water conditions, etc.

When Super Chlorination is enabled, the system will switch on the filter pump, set the pool/spa valves to the

correct position, and set the IntelliChlor chlorine generator to maximum output. This process continues for 24

hours. At the end of the Super Chlorination process, the pool will return to normal operation. It is possible to

manually stop the Super Chlorination process and switch off the filter pump using the Filter (F) button on the

main control panel at the pool equipment pad. When the filter pump is switched on again using the Filter (F)

button, the Super Chlorine process will resume for the duration of time left.

IntelliChlor 1/2

Enable: No

Level: 50%





IntelliChlor 2/2

Super Chlr: Off

Run Hours: 24





MENU ▼ SETTINGS ▼ INTELLICHLOR

Getting There

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 87 88

Comments to this Manuals

No comments

Compool Cp3800 User's Guide Page 43

Comments to this Manuals

Related products and manuals for Above ground pool accessories Compool Cp3800