Compool Cp3800 User's Guide download pdf (Page 53)

Compool/EasyTouch Pool and Spa Control System Upgrade Installation and User’s Guide

Settings Menu: iS10 Spa-Side Remote Controller

You can specify any iS10 Spa-Side remote button to control different functions by assigning each button to a

specific circuit. The iS10 has ten assignable circuit buttons; five button on the top row and five buttons on the

bottom row. You can also use the “Pump Incrs” and “Pump Decrs” circuit to increase or decrease the pump

speed for an IntelliFlo VF (GPM) or VS (RPM) pump. For example, if the “Pump Incrs” circuit is assigned to

an iS10 button, each press of the button will increase the pump speed in specific speed increments as specified

in the “iSx Pump Cntrl” menu setting (see page 46). Speed increments are set from 10 to 250 RPM (or 1 to 10

GPM, for the IntelliFlo VF).

Assign iS10

Before configuring the iS10 Spa-Side remote controller assign names to the circuits (see page 37).

To assign iS10 Spa-Side buttons:

Up/Down buttons: Select the “Top” or Bottom” row to assign circuits to.

Right buttons: Select a circuit to one of the iS10 buttons. Five top row buttons can

be assigned circuits (1/5, 2/5, 3/5, 4/5 and 5/5). See “iS10 button assignments” below

for details.

Right button: Select the circuit setting.

Up/Down buttons: To configure the first button on the iS10 Spa-Side Remote, scroll

through the circuit names and find the circuit that you would like to assign to the first

button on the iS4. The generic circuits selections are: None, Spa, Pool, Aux 1-7,

Feature 1-8, Solar (if selected in “Heat” menu), Heat Boost, Heat Enable, Pump

Incrs, Pump Decrs. “Aux Extra” is displayed only available if the Solar output (J17)

plug on the EasyTouch motherboard is not being used for solar equipment. Use the

Solar button to switch the extra circuit on and off (see page 5). Selecting “None”

does not assign a circuit.

Note: The “Heat Boost” feature will switch on the heater for seven minutes to

increase the spa water temperature. Each time the spa Heat Boost button is

pressed, the temperature will increase about 1

° F. The temperature will not go

beyond the 104° F limit.

Right button: Assign the next circuit (2/5).

Up/Down buttons: Select the first digit for the circuit number (1/5, 2/5, 3/5, 4/5) and

repeat the procedure for the other three buttons.

Press the Menu button to save the settings and to return to the Settings menu

options. Press the button twice to return to the main screen.



Assign iS10 1/4

Row : Top

Circuit : 1/5

[SPA ]



MENU ▼ SETTINGS ▼ IS10 ASSIGN IS10

Getting There

▲

1nottuB

APSLOOP

PMET-IHPMET-OL

2nottuB

1XUA5XUA

3nottuB

2XUA6XUA

4nottuB

3XUA7XUA

5nottuB

4XUA8XUA

iS10 button assignments

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 87 88

Comments to this Manuals

No comments

Compool Cp3800 User's Guide Page 53

Comments to this Manuals

Related products and manuals for Above ground pool accessories Compool Cp3800